I have an iPhone and I can't connect to my bike. What can I do?

Short Term Solution

Cowboy 3 and Cowboy Cruiser/ST/Classic, Cowboy 4/ST owners: if you are in a situation without a phone or if you simply cannot connect and you need to use your bike, please note that you can turn on your bike without the app via the Manual Unlock feature. 

To do this, take out the battery with your key, wait 6 to 20 seconds and push it back into the bike to kickstart the engine. Each bike has its own sweet-spot, so we advise you to try different timings if it does not work the first time.

Connecting to your Bike

Step 1: Make sure you are only connected to one device.

It is very important to make sure you are not already connected to your bike on another device. If you find that you are, then disable Bluetooth on the first device to free up the connection for the second one. Since the bike can only connect to one device at a time.

Go into your settings, tap Bluetooth and click on the information icon next to COWBOY to remove it from your devices. (If you are requested to fill in a Passkey / PIN code when trying to connect, it will appear on your screen above the text-box, if it wont, make sure you try ‘0000’ and ‘1234’ first before reaching out to our support team so they can provide you with your personal token).

Step 2: Ensure your Phone and App are the latest version

Ensure you’re running the latest version of the Cowboy app. Go to the App Store and update your app if a new release is available.

Ensure your device is compatible with our app. On iOS, our latest app requires an iPhone SE (Gen 2) or newer and supports all the OS versions as of iOS 15. A former app version is still supported by iPhone 5S and up and OS versions from iOS 11. Do know that the former app version will have less features and will not receive any updates anymore. 

Step 3: Check your phone settings

Make sure to update your iPhone.

Make sure you are next to your bike when trying to connect.

Switch your phone’s Bluetooth off and on again.

Check your iPhone is not in airplane mode or in low battery mode as that can prevent some features from working.

Try to turn off other Bluetooth devices connected to your phone (for example an Apple watch or Bluetooth speaker).

Force quit the app and open it again.

Make sure the Cowboy APP has all the right permissions from your phone, you can check this by going into settings on your iPhone, scroll down until you see “Cowboy’’ make sure all the permissions are turned on such as Bluetooth and Location. 

Completely shut down your iPhone by holding down the volume button up and the power button. 

If still not connecting -> Uninstall and Reinstall the Cowboy app

Step 4: Check if the battery is charged. 

Take the battery out of the bike and put it to charge. The LED light on the charger should turn red which would indicate that the battery is charging, it will turn green when the battery is full. Reinsert the battery, let it sit in the bike for 6 hours (while it charges the communication module) and then try to connect again.

Step 5: Check on another device. 

If all else fails, please try to use another device, it can be another iPhone or an iPad or even an Android phone, that will help us indicate where the problem lies. 

Should the issue persist, please contact the Cowboy team through the app chat.

My phone asks for a Bluetooth pairing code, where can I find this?

The Bluetooth pairing code is a 6-digit code that will allow your phone to connect with your bike. The pairing code appears on your app when trying to connect with your bike. If you cannot see the Bluetooth pairing code, simply get in touch with the team through the app and an agent will provide you with the code.

If you need further assistance then please raise a ticket with DASH Support