Repair Instructions
Trace the screen cable from the back of the screen a few inches to find the connector. Make sure that each side of the connector is fully mated together, and the small white arrows are lined up. Make sure that the battery is fully engaged in the bike. Now press and hold the button on the battery, and scan the computer key when prompted. The bike should now turn on. If the bike doesn't turn on then make sure that the battery is fully charged and try again.
If you need further assistance then please raise a ticket with DASH Support
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article