Repair Instructions
Trace the front light cable from the back of the light a few inches to find the connector. Make sure that each side of the connector is fully mated together, and the small white arrows are lined up. Then make sure that the disc at the back of the light is set to the on position. With the bike turned on, press and hold the ^ button on the screen. The light icon should appear on the screen the front (and rear) light should turn on.
If you need further assistance then please raise a ticket with DASH Support
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article